Eurobench.com

voda 24 april 2018 15:15

0

MMK invests over RUB 4 billion in environmental programs in 2017

In 2017, Magnitogorsk Iron and Steel Works invested 4,157.8 million rubles in environmental initiatives. From 2018 to 2025, the Company plans to spend more than 38 billion rubles on environmental protection.

In 2017, 2,578 million rubles were invested in the construction and reconstruction of facilities aimed at improving air quality. As a result of the implementation of 31 environmental initiatives, air pollutant emissions were cut by 2,536 tonnes per year. The key projects of the past year included the reconstruction of the sulphur capture systems at the sinter plant, the reconstruction of the gas-cleaning unit at the double-hearth furnace of the electric arc furnace facility, and the construction of aspiration systems for casting beds at blast-furnaces Nos. 9 and 10. These initiatives were carried out in line with the four-party cooperation agreement between MMK, Chelyabinsk Region, the Russian Ministry of Natural Resources and Environment, and the Federal Service for the Supervision of Natural Resources, signed as part of the Year of Ecology held in Russia in 2017. Also in 2017, MMK completed 15 water protection initiatives, which reduced water pollutant discharge by nearly 700 tonnes per year. In 2017, the company launched a large-scale project for the reconstruction of the water circulation supply system with expansion of the coolant reservoir. This project is expected to be completed in 2018. As a result, waste water volume should be reduced 11 times, and pollutant mass should decrease by seven times.

As part of a programme aimed at re-cultivating the Western quarry of Magnitnaya mountain, in 2017 MMK planted trees and bushes across an area of 20 thousand square metres. This included 920 tree seedlings (ash and apple) and 1,540 shrubs (acacia and briar). Also in 2017, MMK processed 5.6 million tonnes of slag from stock heaps II and III. This year the company will complete the processing of the stage III stock heap. In addition to the reclamation of disused land, in 2017 MMK carried out an urban landscaping environmental initiative, planting 1,000 seedlings on the territory of 77 schools and pre-schools, and 460 Siberian spruce in the Southern part of Magnitogorsk.

The constant reduction of the plant's harmful impact on the environment and introduction of the best available technologies are the most important elements of MMK's strategy, ensuring the long-term and sustainable development of the company.

Source : Strategic Research Institute

voda 24 april 2018 15:15

0

GMS Market Commentary on Shipbreaking in Week 16 - OPEN SESAME!

The news that so many in the industry have been waiting for with baited breath FINALLY arrived this week as the remaining signatures required for the Pakistani market to reopen for tankers, were delivered. Reportedly, other than the issuance of NOCs (No Objection Certificates), which is expected early this week, nearly everything is in place for wet units to arrive Gadani once again. This has ended a near 18 month saga for Gadani Recyclers who have been on the sidelines after the tragic explosions onboard the FSU & LPG.

As is being reported, the much anticipated signature of the law secretary was presented on Wednesday before the file was passed on to the Chief Minister’s office in Quetta for the penultimate signature (after continual pressure from the visiting PSBA delegation). The file was signed late Thursday so that the formality of NOCs from the various departments and banks can be issued within the next 2 - 3 days.

Tankers will of course have to be totally gas free for hot works clean, with all cargo residues, slops and sludges completely cleaned from all cargo and slop tanks, similar to the Indian and Bangladeshi guidelines. Although reportedly, hot works certificates issued at the last port of call, rather than the more stringent local explosives inspector demands in Alang and Chittagong, may be locally accepted.

Notwithstanding, what seems clear is that Pakistani levels will not immediately jump up to match Cash Buyer expectations and a fair degree of lowballing is likely to ensue as end Buyers seek to acquire a bargain or two, in light of the recent Bangladeshi travails and general awareness of the number of unsold wet units in the market, especially those in carious Cash Buyer hands. It may be a case of waiting to see who blinks first, as most Cash Buyers will certainly not offload tonnage at some of the below market rates emanating from Pakistan and will likely hold out, bearing in mind the recent slowdown of fresh market offerings.

GMS Weekly
Source : GMS Weekly

voda 24 april 2018 15:16

0

Vedanta's acquisition of Electrosteel credit positive - Moody's

Moody's Investors Service has termed mining giant Vedanta's acquisition of bankrupt Electrosteel Steels through insolvency process as "credit positive", saying the move would augment the former's business profile and revenue generation. Vedanta's acquisition of 90 per cent Electrosteel Steels' stake is credit positive, the ratings agency said in a statement.

It said "Vedanta Resources announced National Company Law Tribunal (NCLT) approved its subsidiary's acquisition of Electrosteel Steels Ltd for USD 813 million. The transaction, although most likely funded with debt, is credit positive for Vedanta because it will enhance the company's business profile and revenue generation, while having a marginal effect on credit quality.”

Vedanta expects the Electrosteel transaction to close by the middle of 2018.

As per the plan, Vedanta will take more than 90 per cent stake in Electrosteel, while the remaining 10 per cent stake will be held by minority shareholders and lenders.

Source : PTI

voda 24 april 2018 15:18

0

Network Rail approval of ultra-long Zinoco rail secures multi-million-pound investment at British Steel

British Steel will step up production of its revolutionary Zinoco® rails after the ultra-long versions of the product received full approval from Network Rail. It said “We're investing a seven figure sum in new plant that will enable us to produce the premium coated rail in lengths of up to 108 metres, and welded lengths of up to 216 metres.”

Zinoco®, the name of which derives from the words ‘Zinc for no corrosion’, is a world-first which can withstand the rigours of being laid in some of the most challenging rail environments. Its installation reduces the need for costly and disruptive rail replacement programmes in highly corrosive areas such as coastal lines, wet tunnels, level crossings, mineral lines and salt pans.

Peter Smith, British Steel Managing Director Rail, said: “Zinoco® offers superior corrosion protection compared to all current rail coating technologies on the market so we’re delighted Network Rail has given it full product approval up to lengths of 216 metres. We’re the only supplier in the world able to deliver corrosion-protected rail at this long length so this is a great success story, not only for us but for British manufacturing.”

British Steel designed Zinoco® in conjunction with Network Rail and initially made deliveries in lengths of 18 metres before a series of trials were conducted with longer lengths.

The reduced number of welds longer lengths require not only speed up the installation process but give the rails greater integrity. Over the last 18 months longer length rails have been installed in tunnels near Bristol and Fife, culminating in Network Rail granting full product approval.

Source : Strategic Research Institute

[verwijderd] 24 april 2018 15:20

0

en daar is voda weer hoor pff

dacht dat je hier niet voor vier uur zou zijn

voda 24 april 2018 15:28

0

AISI update on Raw Steel Production in US in Week 16

In the week ending on April 21, 2018, domestic raw steel production was 1,788,000 net tons while the capability utilization rate was 76.3 percent. Production was 1,721,000 net tons in the week ending April 21, 2017 while the capability utilization then was 73.8 percent. The current week production represents a 3.9 percent increase from the same period in the previous year. Production for the week ending April 21, 2018 is up 0.2 percent from the previous week ending April 14, 2018 when production was 1,784,000 net tons and the rate of capability utilization was 76.1 percent.

Adjusted year-to-date production through April 21, 2018 was 27,969,000 net tons, at a capability utilization rate of 75.6 percent. That is up 1.6 percent from the 27,531,000 net tons during the same period last year, when the capability utilization rate was 74.4 percent.

Broken down by districts, here's production for the week ending April 21, 2018 in thousands of net tons: North East: 214; Great Lakes: 667; Midwest: 165; Southern: 666 and Western: 76 for a total of 1788.

Source : Strategic Research Institute

mvliex 1 24 april 2018 23:54

0

Bod Arcelor op Essar overtreft bod Numetal'

Door ANP Producties
22 min geleden in FINANCIEEL

Luxemburg - Het bod van staalconcern ArcelorMittal op het Indiase Essar Steel bedraagt naar verluidt omgerekend bijna 3,8 miljard euro. Ook zouden er aanvullende toezeggingen bij horen van nog eens zo'n miljard euro, dat meldt de Indiase zakenkrant Business Standard op basis van ingewijden. Daarmee zou het bod van Arcelor volgens de bronnen hoger zijn dan een rivaliserend bod van branchegenoot Numetal uit Mauritius.

Een eerder bod van ArcelorMittal en Nippon Steel werd verworpen omdat het niet geschikt zou zijn. De bedrijven hebben daarom samen een nieuw bod gedaan. Het is de staalbedrijven er alles aan gelegen hun aanwezigheid in groeimarkt India te vergroten.

voda 25 april 2018 14:47

0

Mondiale staalproductie in maart gestegen
Op jaarbasis stijging van 4,0 procent.

(ABM FN-Dow Jones) De wereldwijde staalproductie is in maart gestegen. Dit bleek woensdag uit cijfers van de brancheorganisatie World Steel Association.

In totaal maakten de 64 staalproducerende landen in de afgelopen maand 148,3 miljoen ton staal, een stijging van 4,0 procent op jaarbasis. In de voorgaande maand steeg de productie ook al met vier procent.

De bezettingsgraad van staalproducerende landen steeg in maart op maandbasis van 73,6 procent naar 74,5 procent.

Door: ABM Financial News.

info@abmfn.nl

Redactie: +31(0)20 26 28 999

Copyright ABM Financial News. All rights reserved

(END) Dow Jones Newswires

voda 25 april 2018 15:38

0

ArcelorMittal bids higher for Essar Steel than Numetal -Report

Business Standard reported that ArcelorMittal’s bid for Essar Steel in the first round of bidding for the stressed asset is likely to be higher than that of Numetal. The financial bids submitted by the two companies on February 12 were opened on Tuesday by the committee of creditors (CoC) at a marathon meeting lasting more than seven hours. Sources close to the development said lenders would have to take a 34% haircut if they selected ArcelorMittal’s offer and a bigger one if they chose Numetal. Essar Steel’s admitted financial claims stand at INR 490 billion.

According to sources, ArcelorMittal offered INR 303 billion to secured lenders, and around INR 2 billion each to unsecured lenders and operational expenses. ArcelorMittal has also committed equity infusion of INR 80 billion. However, lenders could still opt for a fresh round of bids, but that was likely to be legally challenged. Legal sources in Numetal said a fresh round of bidding would be challenged. Alternatively, lenders could give time to ArcelorMittal and Numetal for rectification if found ineligible. A decision on the course of action is likely to be taken in the next CoC meeting, slated for April 27.

The rationale for fresh bids, cited by one of the lenders, was that the offers were made based on the liquidation value of Essar Steel, Rs 220 billion. The liquidation value was included in the information memorandum. However, in January, the Insolvency and Bankruptcy Board of India (IBBI) amended the rules and did away with the requirement of disclosing the liquidation value in the information memorandum for better price discovery.

Source : Business Standard

voda 25 april 2018 15:44

0

Tokyo prosecutors scrutinize Kobe Steel's data doctoring - Report

Nikkei reported that Japanese prosecutors have begun investigating Kobe Steel's quality data scandal, a step that could lead to charges. The Tokyo District Public Prosecutors Office's special investigative unit decided on Tuesday to work with the Tokyo Metropolitan Police Department on a joint probe. Tokyo prosecutors have already subpoenaed documents from Kobe Steel, which is suspected of criminally misrepresenting data, a source familiar with the matter told Nikkei.

Kobe Steel has admitted shipping aluminum, copper and other below-spec materials to more than 600 clients around the world. Such materials have found their way into automobiles, aircraft and even shinkansen bullet trains.

A total of 23 plants and units in the Kobe Steel group altered quality assurance documents to wrongly claim that products met client specifications for such factors as strength. A company-commissioned investigation linked five current and former executives to the cheating, which involved more than 40 employees. Data tampering and similar practices went back to the 1970s, according to the review.

Kobe Steel maintains that 98% of the suspect materials received additional safety checks after the doctoring came to light. But Tokyo prosecutors say the shipping of mislabeled materials to clients may have violated product misrepresentation laws.

The scandal has shaken trust in Japanese manufacturing. A third of the clients are overseas, including American aircraft builder Boeing. The U.S. Justice Department has already requested documents from Kobe Steel in a separate investigation launched last year.

Source : Nikkei

voda 25 april 2018 15:45

0

Essar Steel bidding process update - Mint

Mint reported that lenders to Essar Steel Ltd are evaluating inviting fresh bids as current ones are pegged against the liquidation value, far lower than the fair value of the firm. The Mint report quoted sources as saying that “The committee of creditors (CoC) is expected to meet in the next three days to discuss whether bids should be invited from new resolution applicants considering only 30 days are available to assess the eligibility of the bidder.”

Another source said “We only have a month to assess the eligibility of the new bidder which is very less. Moreover, the current bidders are open to negotiations. So we need to take a call whether we should renegotiate or open the ground for new firms as well.”

The decision to reject the bids comes after the National Company Law Tribunal directed the CoC to reconsider the resolution plans submitted by Numetal Mauritius Ltd and ArcelorMittal Netherlands NV in the first round. The lenders had earlier rejected the bids of these companies on the basis of the related party clause of the Insolvency and Bankruptcy Code (IBC). The tribunal has also asked both the bidders to clear debts in defaulting companies where they hold stakes before bidding for Essar Steel.

Source : Mint

voda 25 april 2018 15:45

0

POSCO operating profit in Q1 up 9pct YoY

Reuters reported that South Korean steelmaker POSCO said that its operating profit for the first quarter of 2018 rose 9% YoY on firm steel demand and favourable market conditions. , beating analyst estimates. POSCO posted a consolidated operating profit of 1.49 trillion won for the January-to-March period, compared with 1.37 trillion won a year earlier. Its first quarter revenue was up 5 percent at 15.9 trillion won, while its net profit climbed 10.9 percent to 1.1 trillion won.

The world’s fifth-biggest steelmaker said in a statement that it expected steel demand to keep growing thanks to “sustained restructuring in China’s steel industry and expectations of recovery in emerging market growth”.

The steelmaker also raised its 2018 consolidated sales target to 63 trillion won from 61.9 trillion won.

Source : Reuters

voda 25 april 2018 15:46

0

Kotak Mahindra approves debt resolution plan for Monnet Ispat

Mint reported that Kotak Mahindra Bank Ltd has asked the dedicated bankruptcy court conducting insolvency proceedings against Monnet Ispat and Energy Ltd to include it in the list of assenting lenders in favour of the resolution plan submitted offered jointly by JSW Steel Ltd and AION Capital Partners Ltd. On Tuesday, senior counsel Darius Khambata, representing Kotak Mahindra Bank, said the bank, an unsecured financial lender to Monnet Ispat and Energy, was among the dissenting unsecured financial creditors until now but would now want to be an “assenter”, or part of the lenders who have approved the resolution plan.

He said “We are an unsecured financial creditor with a claim of around Rs73 crore. However, if we become an ‘assenter’, we may get to recover around Rs3-3.5 crore. This will not change anything in the resolution plan that has been submitted since the resolution plan has been passed by about 98% majority approval from the committee of creditors.”

After hearing arguments, the division bench of the National Company Law Tribunal (NCLT) comprising B.S.V. Prakash Kumar and Ravi Kumar Duraisamy directed the bank to file an affidavit in this regard and posted the hearing for 25 April.

The bench observed that any decision on a change in Kotak Mahindra Bank’s status after the 270-day deadline and submission of the plan to NCLT could set a precedent.

A consortium of AION Capital Partners and JSW Steel Ltd has made a binding offer for Monnet Ispat which was approved by the committee of creditors. AION Capital holds a 70% stake in the consortium while JSW Steel holds the rest. If the plan gets approved by the Mumbai bench of NCLT, this will be the second resolution plan from the so-called first list of RBI. On 17 April, NCLT Kolkata had approved the resolution plan submitted by Vedanta Ltd for Electrosteel Steels.

Source : Mint

voda 25 april 2018 15:47

0

Primetals Technologies received PAC from ArcelorMittal Poland for LD convertor

Primetals Technologies has received the Provisional Acceptance Certificate (PAC) from ArcelorMittal Poland SA for the replacement of the second LD (BOF) converter at its D?browa Górnicza steel works. Like its counterpart, Converter #1 already replaced by Primetals Technologies and commissioned in November 2016 – Converter #3 was a turnkey construction. Its replacement had already been agreed as an option in the third quarter of 2015. The second converter will also be suspended by the maintenance-free Vaicon Link 2.0 which not only has a long service life but also minimizes the stresses caused by thermal deformations.

The converters previously used in the D?browa Górnicza steel works had reached the end of their life cycles. As in the case of Converter #1, Primetals Technologies supplied the vessel and the trunnion ring,including the maintenance-free Vaicon Link 2.0 suspension, for Converter #3. The converter bearings and the enclosure have also been renewed. The order included also removal of the existing vessel and assembly and installation of the new equipment. This had been handled by ZKS Ferrum S.A., the Polish partner in the consortium.

ArcelorMittal Poland is the leading steel producer in Poland, operating six production plants in the south of Poland. Its range of products includes profiles, rails, fittings for the construction, transport and mining industries, as well as flat products for the automotive industry and domestic appliances. The D?browa Górnicza plant specializes in producing heavy profiles. It is also one of a few plants worldwide able to produce 120 meter long rails.

Source : Strategy Research Institute

Bijlage:

voda 25 april 2018 15:49

0

ArcelorMittal Ostrava disinvestment update

Radio Czech reported that the Czech Republic’s biggest steelmaker, Arcelor Mittal Ostrava, will have to be in the hands of a new owner by January 1, 2019, under conditions to be set down by the European Commission. Unions at the steel plant made the announcement following talks with prime minister Andrej Babiš and members of the government who are visiting the city.

The divestment is part of a package which the multinational steelmaker has offered in a bid to win Commission support for its takeover of Italian steelmaker Ilva.

An announcement from Brussels competition authorities on those conditions is due to be made officially at the end of May.

Source : Radio Czech

voda 25 april 2018 15:51

0

CMI chosen by JFE Meranti Myanmar to supply new HDG Line and Color Coating Line

In January 2018, the venture, JFE Meranti Myanmar has ordered two high- performance processing lines from CMI Industry Metals, an international technology provider for the steel and metals industry, with headquarter in Belgium. The new continuous hot-dip galvanizing and color coating lines are to be erected in Myanmar's Thilawa Special Economic Zone.

With this investment JFE Meranti Myanmar, that is held by a Singapore-based holding company, owned by JFE Steel, Meranti Steel, JFE Shoji, Marubeni-Itochu Steel and Hanwa, is going to cater for the steadily growing steel demand in Myanmar, and reduce the percentage of steel products that are currently imported into the country. The hot dip galvanizing line capacity will reach 180,000 tons/year and the color-coating line a capacity of 90,000 tonne per year.

The new lines, aiming at a high level of production flexibility and strip quality, feature the full spectrum of CMI’s process technologies: Multi-stage cleaning sections and ultra- low emission furnaces.

Next to a twin pot system to enable both zinc and zinc-aluminum coatings, the CGL line additionally features CMI’s patented jet cooling system with energy recovery, Air-Knife and APC Blowstab low vibration cooling system, as well as an Inline skin pass mill and Tension leveler, Chemical roll-coat post treatment, and rotary Exit shear.

While the galvanizing line is planned to begin operation early 2020, the color coating line is supposed to enter into operation at the end of 2019.

This project further strengthens CMI’s leading position for the complete supply of high- performance processing lines.

Source : Strategic Research Institute

voda 25 april 2018 15:55

0

Khouzestan Steel in talks to buy plate producer Oxin Steel

Financial Tribune reported that Khouzestan Steel Company, Iran’s largest exporter of semi-finished steel products, intends to integrate its production and is negotiating to buy local plate producer Oxin Steel, a company source has told Metal Bulletin.

Located in the southern province of Khuzesta, Oxin Steel is Iran’s biggest producer of heavy plates and has a capacity of 1 million tons per year. It also has a direct-reduction iron plant and a slab mill, each with a capacity of 1 million tons per year.

But in recent years, Oxin Steel’s slab capacity has been idled because plate production required a special quality of slab that could not be produced at the site. As a result, Oxin Steel was purchasing slabs from Khouzestan Steel as well as importing them from Asia.

Source : Financial Tribune

voda 25 april 2018 15:56

0

Experts call for stricter standards for steel rebar in Philippines

Manila Times reported that more stringent measures should be in place to ensure that all steel products in the country are safe to use, a structural engineers’ group said, amid reports that substandard materials continue to proliferate in the market. The Association of Structural Engineers of the Philippines, in particular, wants the Department of Trade and Industry to order the permanent embossing of a “Q” mark on quench tempered or thermomechanically treated (TMT) rebar to make customers more aware of the kind of steel bars they are purchasing.

ASEP Chairman Emilio Morales has campaigned against the use of QT rebar, especially in high-rise buildings, claiming that is inferior to microalloyed rebar and is not safe to use in earthquake prone areas like the Philippines.

Steelmakers, however, insist that QT rebar has been tested and concerned government agencies have also said that existing standards mandate the use of quality products.

Standards are also in the process of being reviewed and both insist that the availability of substandard rebar is the main issue.

In a position paper sent to Trade Undersecretary Mr Ernesto Perez, a copy of which was sent to The Manila Times, Morales said the DTI should disallow the use of painted marks to identify rebar types. He said that “[This] is a source of fraud as the paint can be erased or painted with another color.”

Section 9 of the Philippine National Standard for steel bars used in concrete reinforcement (PNS 49) requires manufacturers to emboss identifying marks, bar size and grade on each steel bar. Color codes painted on the ends, however, can be used in lieu of an embossed grade number.

Former senator Nikki Coseteng claimed that local manufacturers were doing customers a disservice. Coseteng told The Manila Times that “Imported steel bars have proper markings. Local manufacturers do not put proper markings. Why is the grade of steel not embossed in Pag-asa and SteelAsia’s steel bars as mandated by law?.”

She added that “I’m just asking as a citizen. They should put proper marks, emboss it on their steel bars. Are they hiding something? They are hiding the grade of their steel bars.”

Coseteng and Morales are pushing for a ban on the use of QT rebar in high-rise buildings but a SteelAsia Manufacturing Corp. official has rejected the claim that these are unsafe.

Source : Manila Times

voda 25 april 2018 15:56

0

GMS update on Shipbreaking in Bangladesh in Week 16 - STRESSES ACCUMULATE!

Voluminous amounts of tonnage has arrived and been beached in Chittagong over the past several tides, including this week, where nearly 310,000 tons of lightweight is either at anchorage or has found its place at a local yard. Additionally, the highly stressful non-performance and panic-induced renegotiations from end Buyers have rapidly transformed Bangladesh into an incredibly unreliable market.

In contrast, this market has performed comparatively better over the last few years - admittedly, with a largely upward moving market supporting the performance of domestic Recyclers. However, this time around, it has been rather inexcusable to see the behavior of even well-established and reliable players in neglecting their responsibilities on their concluded tonnage.

With almost USD 50/LDT lost on local steel plate prices over the last few weeks, several large LDT vessels have either become stuck or entirely abandoned by unscrupulous end Buyers who have failed to open their respective LCs and have chosen to back trade on their obligations on the back of the ongoing market declines.

Surprisingly however, despite the rapidly declining local sentiment, there was at least one tanker sale concluded to a local Recycler as the PLATINUM (12,253 LDT) was fixed at a MASSIVE USD 491/LT LDT with Sellers making her “gas free safe for man entry and hot works” clean. Although the vessel has the option of the Cash Buyer nominating other locations, reportedly she has been concluded to a local buyer already. Given that the local market is currently no where near these levels, this certainly seems to be a one-off sale.

Notwithstanding, with the Pakistani silver-lining now exponentially brighter, a severely muted degree of communication with Bangladeshi Buyers in the weeks ahead is almost a given.
Source : Strategic Research Institute

voda 25 april 2018 15:59

0

Tanzania builders face tough time as steel prices skyrocket

Mining NE reported that builders and infrastructure developers are now digging deeper into their pockets to obtain steel following an increase in prices of the commodity. Steel manufacturers said that the increased price is down to dwindling supply of scrap metals, which has forced them to import raw materials.

According to them, they depend on the Lake Zone as their main source of the scrap metals, mainly from mining activities, but the supply has gone down significantly.

A quick survey by The Citizen at some retail stores in Dar es Salaam shows that the price of steel has gone up by almost 50%. It now stands at Sh22 000 compared to Sh13 000 two months ago for a 12-inch piece.

The country’s demand of steel for various activities is around 700 000 metric tonnes per year while the production capacity from 24 manufacturers is 600 000 metric tonnes per year only.

This was revealed over the weekend at a dialogue organised by the Fair Competition Commission, which brought together steel manufacturers to discuss market challenges and the way forward.

Kamal Steel Ltd director Satyam Swatantra said the price of the scrap metals in the local market has risen due to scarcity and importation taxes.

Mr Swatantra added that the manufacturers are currently facing a big challenge to remain in the market. He said that “Sometimes other factories are forced to close temporarily so that they can collect the raw materials.”

For his part, Steel Master Ltd director Mr Hitesh Patel said the international price of the raw materials for producing steel is down, but weakness of the shilling forces prices to hike.

Source : Mining NE

Vertraagd	15 mei 2024 17:35
Koers	23,880
Verschil	-0,240 (-1,00%)
Hoog	24,260
Laag	23,810
Volume	2.345.565
Volume gemiddeld	2.535.566
Volume gisteren	2.279.793

02 mei	Beursblik: resultaten ArcelorMittal b...	1
02 mei	AEX gaat hogere opening tegemoet, ter...	4
02 mei	Meer omzet en hoger resultaat bij Arc...
01 mei	Lagere winst ArcelorMittal verwacht
23 apr	Mondiale staalproductie daalt toch weer
16 apr	Deutsche Bank haalt ArcelorMittal van...	1
12 apr	Video: cyclische aandelen bieden kansen
09 apr	World Steel Organisation ziet vraag n...
22 mrt	Mondiale staalproductie in de lift
12 mrt	ArcelorMittal neemt groot belang in V...

Arcelor Mittal « Terug naar discussie overzicht

Nieuws en info hier plaatsen (deel 4)

Meedoen aan de discussie?

Direct naar Forum

Detail

ArcelorMittal nieuws