Eurobench.com

voda 16 september 2019 17:53

0

Grootste zonnedak België bij ArcelorMittal

Gepubliceerd op 16 sep 2019 om 17:43 | Views: 156

ArcelorMittal 17:29
15,28 -0,32 (-2,06%)

GENT (AFN/BELGA) - Op de daken van de fabrieksgebouwen van staalproducent ArcelorMittal in Gent zijn meer dan 27.000 zonnepanelen geplaatst. Het gaat om het grootste zonnedak van België. De panelen zullen elk jaar 10.000 megawattuur (MWh) produceren, evenveel als het energieverbruik van 2900 gezinnen.

In de toekomst wil ArcelorMittal ook andere Belgische sites uitrusten met zonnepanelen. Werknemers van ArcelorMittal konden meehelpen met de kosten van 7,5 miljoen euro. De 5800 werknemers kunnen daarbij rekenen op een rendement van 4 procent.

Met een oppervlakte van 100.000 vierkante meter is de installatie ook het op drie na grootste zonnepark in België. Voor de bouw van de zonnepanelen is 157,2 ton staal gebruikt. Ze vormen een gewicht van 1,5 miljoen kilo op de daken van de warmwalserij, de koudwalserij, de verflijn en een afdeling voor lasergelaste vormstukken.

voda 17 september 2019 07:53

0

Advent en Cinven in de race voor liftentak Thyssen - media

(ABM FN-Dow Jones) Advent International, Cinven en het staatsinvesteringsfonds van Abu Dhabi zijn samen in de race voor de liftendivisie van ThyssenKrupp. Dit schreef de Financial Times dinsdag op basis van bronnen.

Het gezamenlijke bod van Advent, Cinven en het staatsfonds zal vermoedelijk moeten concurreren met biedingen van het Finse Kone en het Japanse Hitachi.

Mogelijk vangt ThyssenKrupp 20 miljard dollar voor zijn liftentak.

Door: ABM Financial News.
info@abmfn.nl
Redactie: +31(0)20 26 28 999

© Copyright ABM Financial News B.V. All rights reserved.

voda 17 september 2019 16:18

0

India Launches Steel Import Monitoring System

India’s Commerce & Industry Minister Mr Piyush Goyal launched Steel Import Monitoring System to give advance information about steel imports to government and stake holders. The SIMS will provide advance information about steel imports to Government and stake holders including, steel industry, steel consumers to have effective policy interventions. In this system, the importers of specified steel products will register in advance on the web portal of SIMS providing necessary information. The registration will be online and automatic and no human intervention is required. The importer can apply for registration not earlier than 60th day and not later than 15th day before the expected date of arrival of import consignment. The automatic Registration Number thus granted shall remain valid for a period of 75 days. The information about the steel imports provided by the importers on the SIMS will be monitored by the Steel Ministry.

The system has been developed in consultation with Ministry of Steel on the pattern of US Steel Import Monitoring and Analysis system.

SIMS has been notified with effect from 1st November, 2019 vide Notification No. 17 dated 5th September, 2019. The system shall require importers to submit advance information in an online system for import of 284 steel tariff lines at 8-digit HS code in order to obtain an automatic Registration Number by paying prescribed registration fee. Importer shall have to enter the Registration Number and expiry date of Registration in the Bill of Entry to enable Customs for clearance of consignment. The SIMS will be effective from 01.11.2019, i.e., Bill of Entry on or after 01.11.2019. The facility of on line Registration will be available with effect from 16/09/2019.

Source : Strategic Research Institute

voda 17 september 2019 16:18

0

NCLAT to Hear CBI, ED & SIFO in JSW Plea on BPSL on October 14

A 3 member bench of National Company Law Appellate Tribunal directed that it will hear Central Bureau of Investigation, Enforcement Directorate and Ministry of Corporate Affairs Serious Fraud Investigating Office regarding JSW Steel's plea seeking immunity from prosecution after buyout of Bhushan Power and Steel, which is facing money-laundering allegations on 14 October. It said "Taking into consideration the nature of the case, we allow the appellant to implead Union of India through the secretary, Ministry of Corporate Affairs and director, Directorate of Enforcement as respondent Nos 3 and 4, respectively.”

The NCLAT also said it will decide over the payment of INR 19,350 crore by JSW Steel to the Committee of Creditors of Bhushan Power and Steel on the next date of hearing.

However, the bench declined to stay the order of depositing the amount within a month, which is 5 October.

The appellate tribunal's direction came during the hearing of a petition filed by JSW Steel seeking protection against the ongoing investigation going under the Prevention of Money Laundering Act against BPSL.

Source : Strategic Research Institute

voda 17 september 2019 16:20

0

ArcelorMittal Asks Midrex to Design Demonstration Plant for Hydrogen Steel Production in Hamburg

ArcelorMittal announced that it has commissioned technology provider Midrex Technologies to design a demonstration plant at its Hamburg site to produce steel with hydrogen. Both companies have now signed a Framework Collaboration Agreement to cooperate on several projects, ranging from research and development to the implementation of new technologies. The FCA will be governed by a number of Project Development Agreements, incorporating the expertise of Midrex and ArcelorMittal. The first Project Development Agreement is to demonstrate in Hamburg the large-scale production and use of Direct Reduced Iron (DRI) made with 100% hydrogen as the reductant.

In the coming years, the demonstration plant will produce about 100,000 tons of direct reduced iron per year - initially with grey hydrogen sourced from natural gas. Conversion to green hydrogen from renewable energy sources will take place once available in sufficient quantities and at an economical cost. Energy for hydrogen production could come from wind farms off the coast of Northern Germany. The plant will be the world’s first direct reduction plant on an industrial scale, powered by hydrogen.

ArcelorMittal Hamburg already produces steel using DRI technology. During the process, iron oxide pellets are reduced to metallic iron, the raw material for high quality steel, by extracting oxygen using natural gas.

Source : Strategic Research Institute

Bijlage:

voda 17 september 2019 16:22

0

JSW Utkal Steel gets Forest Clearance for 12 Million Tonne Steel Plant

The Forest Advisory Committee of the Ministry of Environment and Forest has accepted the Odisha Government’s proposal for transfer of forest clearance of the 1083.69-hectare land acquired for POSCO near Paradip to JSW Utkal Steel Limited to set up an integrated steel plant of 12 million tonne capacity. It said “This proposal has been deliberated in earlier meetings. FAC observed that the approval under Forest Conservation Act, 1980 granted to one project proponent for a specific purpose, can be transferred to another project proponent if the purposed land use remains the same. The balance forest land of 169.53 hectares shall be returned to the Forest department. This land shall be adequately afforested with native forestry species and protected at the cost of a new user agency.”

The State Government had informed the MoEF&CC that the POSCO-India has no objection if the approval is granted to the new project proponent. Around 447 families are likely to be displaced by the proposed steel project.

Nearly 400 people of six villages of Kujang block will be affected by the proposed steel plant project of JSW. The decision of transfer of land to JSW has now sparked resentment among the locals and other outfits who had earlier spearheaded the anti-POSCO agitation.

Source : Strategic Research Institute

voda 17 september 2019 16:23

0

Danieli’s LF & CCM Commissioned at Bangladesh Steel Rolling Mills

A 55-ton LF and 3-strand billet caster have started at BSRM, in the new meltshop in Mirsharai, Bangladesh. The ladle furnace has two ladle cars positioned at 90° and a 10 MVA + 20% (overload) transformer. It is equipped with Bus Bar Electrode Arms and “Inert Roof” to minimize the electrode-side oxidation, the slag/steel oxidation, as well as oxygen, hydrogen and nitrogen pick-up in the refined and clean liquid steel.

The 8-m radius caster features Mould-EMS for LC and MC steels, casting at a rate of 30 ton/hour. It produces 160-mm square billets in open and submerged stream casting, mainly for rebar but also for profiles on the company’s rolling facilities.

Source : Strategic Research Institute

Bijlage:

voda 17 september 2019 16:23

0

Turkey Steel Sector Could Face Losses after Cuts to EU Quotas - Mr Adnan Aslan

Reuters reported that new restrictions on imports to the European Union next month may further damage the Turkish steel sector, even as it seeks new markets to compensate for losses from US and EU tariffs, Turkey’s Steel Exporters’ Association chief said. Turkey’s steel sector has come under pressure from an economic slowdown which has taken its toll on the construction, automotive and white goods sectors, driving down steel consumption by 31% in the year to July and production by more than 10%. CIB Chairman Adnan Aslan told Reuters in an interview that steel exports, already down 0.8% to USD 9.4 billion in the year to end August, will fall to $13 billion in 2019 from USD 15.6 billion last year.

In February, EU quotas for 26 grades of steel were set at the average level of imports in 2015-2017 plus 5%, with further 5% hikes due in July and in July 2020. Imports of steel beyond these quotas are subject to a 25% duty. But the European Commission later cut this year’s quota increase to 3% from 5%, effective October 1. It also limited any one country to a 30% share of imports of hot-rolled flat steel per quarter.

Mr Aslan said the move will lead to a contraction in Turkey’s flat steel and rebar exports. He said that “We can see the limitations are aimed at curbing imports from Turkey,” Aslan said. “It is not understandable why the EU... wants to limit country-based imports. We filled the quota for long products in a month. We switched to a new one-year quota in July. We will most likely complete that in September. Because the quotas are full, Turkey will not be able to export long products to the EU until July 2020.”

Source : Reuters

voda 17 september 2019 16:27

0

GMS Market Commentary on Shipbreaking in Week 37 - TRICKLE OF TONNAGE!

Despite the fourth quarter of the year being well under way, it has been surprising to see the Indian subcontinent markets still stuck in the ongoing doldrums. As we reach the middle of September, markets have not been this depressed for several years (at least) and the pervading negativity seems to show few signs of abating. Bangladeshi plots remain stocked after a heavy first half year of buying and a longer rainy /monsoon season has seen minimal product shift from domestic yards over the summer months. With local steel plate prices having maintained overall previous levels, most are expecting a return to some sort of form in the weeks / months ahead, but it seems to be a process slower than what industry players were previously anticipating.

There is also the lingering hope that the BSBA will eventually overturn the recent increase in VAT that was imposed during the June 13 th budget and that the recent influx of cheap Chinese billets also slows a little, especially given a cooling in the trade war scenario between China and the US.

On the other side, India remains highly inert and very few end Buyers are willing to discuss fresh units at this time - such has the ferocity of recent falls been in Alang. Steel prices have also crashed by about USD 75/LDT (with further declines this week) whilst the currency has depreciated by about 2%, from INR 69 to the US Dollar to well above INR 72 in recent times.

There has seemingly been a firming interest in Pakistan to acquire new units over the last few months, but prices and confidence remain far too tentative and sluggish, given well over a year of inactivity on Gadani shores and as damaging cheap Iranian billets continue to flood the market for much of this year.

Finally, despite a firming Lira, the Turkish market takes a noteworthy plummet this week as local steel plate prices nose-dived, bringing vessel prices sharply down with them. With freight markets across the board pushing on, there is expected to be a trickle of tonnage into the recycling markets, especially if current trends / pricing persists!

Source : Strategic Research Institute

voda 17 september 2019 16:30

0

Nucor Cuts Guidance for Third Quarter of 2019 Earnings

Nucor Corporation has announced guidance for its third quarter ending September 28, 2019. Nucor expects third quarter earnings to be in the range of USD 0.75 to USD 0.80 per diluted share. This range is a decrease compared to second quarter of 2019 earnings of USD 1.26 per diluted share and a decrease relative to third quarter of 2018 earnings of USD 2.13 per diluted share. Included in the third quarter of 2018 results was a non-cash impairment charge of USD 110.0 million, or USD 0.26 per diluted share, related to our proved producing natural gas well assets. Also included in the third quarter of 2018 earnings was a benefit of USD 24.8 million, or USD 0.06 per diluted share, related to insurance recoveries. The performance of the steel mills segment in the third quarter of 2019 is expected to decrease compared to the second quarter of 2019 due primarily to lower prices for sheet and plate steel. Although we still see stability in most of the end use markets that we serve, there has been some softening in automotive, agricultural products and power transmission markets.

The profitability of the steel products segment in the third quarter of 2019 is expected to improve as compared to the second quarter of 2019, as nonresidential construction market conditions remain strong. In addition, recently implemented efficiency initiatives in rebar fabrication and metal buildings are enhancing performance from those businesses.

The performance of the raw materials segment is expected to decrease in the third quarter of 2019 as compared to the second quarter of 2019 due to further margin compression in the Company's direct reduced iron (DRI) businesses. Last week our DRI facility in Louisiana began a planned outage that is expected to last until mid-November.

Source : Strategic Research Institute

voda 17 september 2019 16:31

0

Stelco Unveils New Batch Annealing Plant at Hamilton

Stelco has unveiled a new CAD 30 million, state-of-the-art steel processing facility in a move that is being touted as one of the biggest investments at the steelmaker's Hamilton division in memory. The batch annealing facility replaces a similar operation on Hamilton's Bayfront that was mothballed more than a decade ago. The business plan is to use the giant operation to process more than 200,000 net tons of steel products per year to compete with more than 500,000 tons of similar steel that is coming into Canada from the US.

Stelco's Hamilton Works has a cold-mill facility that is capable of processing much more steel than it currently does. By expanding the range of products to sell, through further processing the cold-rolled steel in the batch annealing facility, the company hopes to more fully utilize the cold mill's capacity.

Source : Strategic Research Institute

Bijlage:

voda 17 september 2019 16:32

0

Iran July to August Steel Exports increase by 37%

Press TV reported that Iran’s main government body active in the steel industry says monthly exports from the country have increased by more than a third. IMIDRO said that steel exports recorded between July 23 and August 22 this year had surged to 633,050 tonnes, up from 462,000 tonnes in the same period last year. The holding said Khouzestan Steel Company a major mill located southwest of Iran, topped the list of nine big exporting companies with 174,772 tonnes while Iran Alloy Steel Company came last with a total exports of 510 tonnes in the monthly period.

IMIDRO said leading steel mills had shipped a total of 2,904,366 of cargoes to foreign customers in the five months ending August 23, 2019, down four percent compared to the similar period in 2018.

A major global producer and exporter of steel, Iran has sought to increase output despite economic woes that have affected downstream sections of the industry.

The government said earlier this month that it would slap a harsh tariff of 25% on exports of raw iron to help steel mills struggling with low stocks. Official data suggest Iran’s annual steel output hit a record of 35 million tonnes in the year ending March 2019 while exports stood at seven million tonnes.

Source : Press TV

voda 17 september 2019 16:33

0

AISI update on Raw Steel Production in US in Week 37

In the week ending on September 14, 2019, domestic raw steel production was 1,811,000 net tons while the capability utilization rate was 77.8 percent. Production was 1,866,000 net tons in the week ending September 14, 2018 while the capability utilization then was 79.6 percent. The current week production represents a 2.9 percent decrease from the same period in the previous year. Production for the week ending September 14, 2019 is down 1.3 percent from the previous week ending September 7, 2019 when production was 1,835,000 net tons and the rate of capability utilization was 78.8 percent.

Adjusted year-to-date production through September 14, 2019 was 68,959,000 net tons, at a capability utilization rate of 80.7 percent. That is up 3.8 percent from the 66,455,000 net tons during the same period last year, when the capability utilization rate was 77.5 percent.

Broken down by districts, here's production for the week ending September 14, 2019 in thousands of net tons: North East: 201; Great Lakes: 692; Midwest: 179; Southern: 668 and Western: 71 for a total of 1811.

Source : Strategic Research Institute

voda 17 september 2019 16:33

0

Myanmar Industry Body Aims to Boost Local Steel Production

MM Times reported that to reduce Myanmar’s dependence on imported steel, plans are being made to increase local production with Chinese technology. Mr U Tin Myint, chief adviser to the Myanmar Steel Association said that “Local steel consumption relies heavily on imports rather than local production as only 10% of what the local market needs is produced locally while the 90 percent is imported. We are doing research to produce more steel locally with help from the Chinese .We hope that we can produce enough to cover two million tons to four million tonnes of local requirements.” He said that the manufacturing of steel locally is expected to start next year and ramp up by 2023 near coastal areas where raw materials for production are imported.

Mr U Sit Taing Aung, chair of the MSA said that “Naturally, steel requires large long-term investments so it is important to have a stable, predictable economic and political environment. Moreover, the government will also need to support the establishment of standards for the local market.”

MSA officials said that steel consumption is an indicator of economic growth and domestic consumption has been steadily rising, from 2.1 million tonnes in 2017, to 2.4 million tonnes in 2018, and three million tonnes so far this year.

Source : MM Times

voda 17 september 2019 16:35

0

Metalloinvest Completes Implementation of Digital Platform for BPM

Leading global iron ore and HBI producer and supplier, and one of the regional producers of high-quality steel Metalloinvest has completed the first stage of its major digital transformation - the introduction of a unified integrated financial and business management system. More than 100 of the Company’s management and production systems have been replaced by a single ERP system based on the latest SAP S/4HANA solution. Consulting company Accenture is responsible for the methodology and project management. Currently, the ERP system is implemented at four Metalloinvest production sites, as well as at the Company’s trading and logistics operators. The number of system users in 2018-2019 has almost doubled. Moreover, 35,000 IT service users are working in the new system. The goal of Metalloinvest’s Industry 4.0 digital transformation programme is to reach a new level of business management and long-term industrial leadership.

Total investment in the development of the integrated financial and business management system is estimated at more than 6 bn roubles. The introduction of a single digital platform is accompanied by a comprehensive transformation of business processes in 18 functional areas. 45,000 employees of the Company were transferred to optimised structures and 24 related transformation projects are being implemented.

Metalloinvest presented the first results of its digital transformation at the 4th International SAP Metals and Mining Summit, which was held in Moscow on 11 September, and in Stary Oskol at OEMK and Metalloinvest’s Innovation Centre on 12 September.

Mr Yuriy Gavrilov, Strategy, Development and Transformation Director at Management Company Metalloinvest, commented that “We have been in the active stage of implementation of the Industry 4.0 programme for the past three years. Last year, we introduced an integrated management system at our mining enterprises, Lebedinsky GOK and Mikhailovsky GOK, and this year we launched the second wave at our steelmaking enterprises, OEMK and Ural Steel. We are currently creating a powerful platform for our future development. Digital technology is boosting Metalloinvest’s efficiency and sustainability and enables us to react more quickly to changing market conditions and fulfil customers’ requirements in terms of quality and speed of supply.”

Source : Strategic Research Institute

voda 17 september 2019 16:36

0

GMS Market Commentary on Shipbreaking in Week 37 in Bangladesh- DISTRACTED & DISINTERESTED!

Bangladesh appears beset by distractions and disinterest this week, as very few serious offers appear to be emanating from the local market. Local Buyers continue to be overcome by cheaper competitive steel that is taking a bite out of the resale price of ship’s steel, in addition to L/C limits / restrictions for a good majority of local Buyers who are in the hunt for the occasional large LDT unit being proposed locally. Cheap Chinese billets and the ongoing rains are seeing inventory struggle to shift from local plots and this remains the leading factor for the muted demand on fresh tonnage. Furthermore, the challenge from the BSBA on the recent VAT increase on the ship recycling sector has yet to come to fruition, even though optimism on their efforts presists.

While many Ship Owners and Cash Buyers remain optimistic on a Bangladeshi return to the fore, the surprising 4 th quarter ongoing has left many wondering just when the customary late year bounce back will come around (if at all).

Source : Strategic Researc Institute

voda 17 september 2019 16:38

0

JSW Utkal Steel gets Forest Clearance for 12 Million Tonne Steel Plant

The Forest Advisory Committee of the Ministry of Environment and Forest has accepted the Odisha Government’s proposal for transfer of forest clearance of the 1083.69-hectare land acquired for POSCO near Paradip to JSW Utkal Steel Limited to set up an integrated steel plant of 12 million tonne capacity. It said “This proposal has been deliberated in earlier meetings. FAC observed that the approval under Forest Conservation Act, 1980 granted to one project proponent for a specific purpose, can be transferred to another project proponent if the purposed land use remains the same. The balance forest land of 169.53 hectares shall be returned to the Forest department. This land shall be adequately afforested with native forestry species and protected at the cost of a new user agency.”

The State Government had informed the MoEF&CC that the POSCO-India has no objection if the approval is granted to the new project proponent. Around 447 families are likely to be displaced by the proposed steel project.

Nearly 400 people of six villages of Kujang block will be affected by the proposed steel plant project of JSW. The decision of transfer of land to JSW has now sparked resentment among the locals and other outfits who had earlier spearheaded the anti-POSCO agitation.

Source : Strategic Research Institute

voda 18 september 2019 16:11

0

Production Pruning – Kalyani, Vardhman, Karnataka Sponge Makers Confirm Cuts

Mint reported that slowdown in India’s steel sector is spreading to medium and small enterprises, with several companies cutting production in response to lower demand. Such units make up about one-half of India’s total steel production but higher iron ore prices and weak demand have forced many to trim output since August. In some cases, production has been halved. Mr RK Goyal MD of Kalyani Steel said “There are no buyers in the market today. Sales are not happening. We have cut production by 25-40% in the last 15 days.”

Ludhiana based auto grade steel manufacturer Vardhman Special Steels plans to start cutting production from October. CMD Mr Sachit Jain said “We were lucky because we already had a scheduled plant shutdown. The plant has restarted now. We will be producing less than what we anticipated, maybe we will cut by about 30% but I guess we will be cutting less than our competitors."

Mr PVS Rao, president of Karnataka Sponge Iron Manufacturers Association, which represents 64 units, said “We’ve reduced production over the last 2-3 months. Some people are doing maintenance shutdowns at plants even when it’s not needed. Salaries are being delayed by about 2 months after we started cutting production in July. We do about 10,000 tonnes a day of sponge iron production and we’ve reduced it by about 30% in the last two months. More steel mills will decide by September on whether they should cut production.”

Source : Livemint

voda 18 september 2019 16:11

0

JSW Steel Can’t Implement BPSL Resolution Plan as per NCLT Ruling

Financial Express reported that Bhushan Power and Steel Limited’s highest bidder JSW Steel has informed the National Company Law Appellate Tribunal that it would be impossible for it to implement the resolution plan for BPSL if it has to share profits earned by the insolvent firm during the resolution period with creditors. JSW has also expressed concerns over the chances of BPSL’s assets being undermined given it doesn’t have tribunal’ protection against possible attachment of assets for offence committed by the erstwhile promoters.

Challenging NCLT’s September 5 order that approved its INR 19,700-crore bid for the insolvent firm, JSW said “The direction in relation to treatment of CIRP EBITDA amounts to modifying the resolution plan in a material manner, without the consent of the appellant and imposition of such a condition would make it impossible for the appellant to implement the resolution plan.”

In its order, NCLT had directed JSW Steel to distribute profits earned during the Corporate Insolvency Resolution Process period among financial and operational creditors on pro-rata basis.

Source : Financial Express

voda 18 september 2019 16:12

0

Mr Edouard Guinotte will be New Chairman of Vallourec’s Management Board in March 2020

Vallourec’s Supervisory Board met under the chairmanship of Vivienne Cox to discuss the succession plan for the Management Board whose terms of office expire on 15 March 2020. As Philippe Crouzet did not wish to take on a new term of office, the Supervisory Board has managed an internal and external selection process. At the end of this process, following the recommendations from the Appointments, Remuneration and Governance Committee, Edouard Guinotte was selected to succeed Philippe Crouzet as a member and Chairman of the Management Board. Edouard Guinotte will be appointed for a four-year term. Edouard Guinotte possesses extensive knowledge of Vallourec's activities, markets and customers. During his more than twenty years career with the Group, much of it working in international markets, he has demonstrated his leadership and his strategic vision. He joined the Executive Committee in 2017 with responsibility for the Middle East and Asia region.

Olivier Mallet will continue as a member of the Management Board and as the Group's Chief Financial Officer. He will exercise his mandate until the 2023 Ordinary General Meeting.

Edouard Guinotte, 48, a graduate of the Ecole des Mines de Paris, holds the INSEAD Management Program. In 1995, he joined Vallourec as head of logistics and production at Vallourec Composants Automobile. He spent his entire career within the Group and hold various positions in various countries. From 1998 to 2000, he was Group Controller and then became Director of an operating entity in Mexico for 3 years. In 2004, he returned to the Automotive Division as Marketing Director before becoming Strategy and Development Director of the Group's Oil and Gas business in 2007, where he led in particular the plans to acquire the first 20% of Tianda and the acquisition of Vallourec Saudi Arabia. From 2011 to 2014, he was President of Vallourec USA based in Houston, leading the commercial policy allowing Vallourec to double its sales in the United States following the start-up of the new Youngstown plant and then became Vice-President of the Group in charge of Trade and Development OCTG in the Eastern Hemisphere region. Since 2017, he has been Senior Vice President and member of the Group's Executive Committee in charge of the Middle East and Asia.

Source : Strategic Research Institute

Vertraagd	19 apr 2024 17:35
Koers	23,830
Verschil	+0,030 (+0,13%)
Hoog	23,880
Laag	23,440
Volume	2.845.773
Volume gemiddeld	2.432.086
Volume gisteren	2.676.573

16 apr	Deutsche Bank haalt ArcelorMittal van...	1
12 apr	Video: cyclische aandelen bieden kansen
09 apr	World Steel Organisation ziet vraag n...
22 mrt	Mondiale staalproductie in de lift
12 mrt	ArcelorMittal neemt groot belang in V...
05 mrt	Beursblik: experts vinden koerswinst ...
23 feb	Mondiale staalproductie daalt opnieuw
08 feb	ING: ArcelorMittal doet het beter dan...
08 feb	Fors verlies voor ArcelorMittal
06 feb	Beursblik: winstgevendheid ArcelorMit...

Arcelor Mittal « Terug naar discussie overzicht

Nieuws en info hier plaatsen (deel 4)

Meedoen aan de discussie?

Direct naar Forum

Detail

ArcelorMittal nieuws